|
REPORT COPYRIGHT VIOLATION IN REPLY
|
|
Message Subject
|
Anyone use K&W fiber head gasket repair?
|
|
Poster Handle
|
Anonymous Coward |
|
Post Content
|
I have used it before. Do not let the system pressurize. Click coolant/rad cap to first click, and check level every few days. This will make the "patch" last longer.
Quoting: Justalittlebad Well I used it last night and had the cap off for a while, while it idled and heated up, then replaced cap as coolant was coming out filler neck due to expansion... was that ok? Yes. You want all of the air out, but like a pressure cooker, if it is not air tight, it will loose a bit. That is the trade off on the KW working longer. No pressurization in the cooling system is easier on the area the KW sealed. Thanks. How much time did you get before the gasket completely failed, or is it still running, and how many miles later? Thanks again! I have seen it last 20-30k miles. Good luck, and your welcome.
|
|
|
Please verify you're human:
|
|
|
Reason for copyright violation:
|
