REPORT COPYRIGHT VIOLATION IN REPLY
|
Message Subject
|
Anyone use K&W fiber head gasket repair?
|
Poster Handle
|
Anonymous Coward |
Post Content
|
...
Well I used it last night and had the cap off for a while, while it idled and heated up, then replaced cap as coolant was coming out filler neck due to expansion... was that ok?
Quoting: Anonymous Coward 65665023 Yes. You want all of the air out, but like a pressure cooker, if it is not air tight, it will loose a bit. That is the trade off on the KW working longer. No pressurization in the cooling system is easier on the area the KW sealed. Quoting: Justalittlebad Thanks. How much time did you get before the gasket completely failed, or is it still running, and how many miles later? Thanks again! Quoting: Anonymous Coward 65665023 I have seen it last 20-30k miles. Good luck, and your welcome. Quoting: Justalittlebad Sounds good to me. I noticed when I shut the engine off this morning I heard a gurgle noise. Is that trapped air in the system from when I released some coolant to make room for the 8 ounces of K&W? I hope it is not exhaust gasses, but I never heard the gurgle until this morning, so I'm thinking the system is burping...
|
|
Please verify you're human:
|
|
Reason for copyright violation:
|