|
REPORT ABUSIVE REPLY
|
|
Message Subject
|
Anyone use K&W fiber head gasket repair?
|
|
Poster Handle
|
IDW |
|
Post Content
|
BTW, I think it is prudent to explain that this repair you used will only fix a leak between the water passages and the oil passages right. If you had coolant in the oil and no sign of gasses in the cooling system the fix you used can and will work pretty good if you flush the crap out when the leak stops. But it can never hold against the pressure in the combustion chamber for very long. I predict within a day or so you will be right back where you were.
Quoting: IDW 70286421 DuPoint specifically indicated that the fix is not appropriate for coolant to oil leaks, and indicated that coolant to chamber leaks is what the product was designed for... No possible. Simply not possible. Even though some coolant is leaking into the combustion chamber on the intake stroke,the pressure in the combustion chamber is many many times the coolant pressure. This repair cannot and will not work as claimed. It's like the engine restore in a can,or "motor honey", it doesn't actually do anything but ruin your engine in the long run and to be blunt the way these mechanical snake oils are marketed is because people like you are foolish enough to believe cheap easy fix can work..
|
|
|
Please verify you're human:
|
|
|
Reason for reporting:
|
