VIII. THE SYSTEM MODELS FOR CHEMTRAILS AND HAARP

Now for a short review of these processes and the common sense behind most of these inventions.

Back in the mid-80's, I was working on problems connected with the Molten Salt Reactor's breakdown of fluoride fuel compounds by radiation, or radiolysis, that contributed to a fluorine explosion and lots of sick persons exposed to HF. Shortly after the Molten Salt problems were isolated and defined I began working on problems connected with the K-25 gas diffusion plant. We were having high levels of thyroid illness at the plant and around the town. So, this led rather rapidly to the high loss of poison HF, since fluorine screws up the thyroid.

My looking at these problems considered any radiolytic effects on the compounds. It was via the process of considering how chemicals like Freon in the atmosphere produced the ozone hole and ozone depletion effect due to radiation breakdown of Freon that lead to the same effect of radiation dominating the CO-2 rise in the atmosphere due to UV damage to ocean plankton. Then the discovery of how rising UV also set up a injection vector for HF and IR absorbing hydrocarbons into the upper atmosphere.

This then became the need for chemtrails and HAARP, both of which are my original ideas. As well as the discovery of the radiolytic processes for CO-2's rise and the prime global warming vector from NFx. I found all the effects connected to radiolytic effects associated with the ozone depletion dominated these processes and this gave a better handle on ways to control the GW problems.

Few persons that have not been around and know the systems of Oak Ridge would realize that chemtrails and the HAARP system are simply spin-offs of the Manhattan Project. The WWII gas diffusion project was very prone for loosing HF from all the UF-6 processing. So, the way that was handled to reduce emissions was two ways: 1. Water absorption in bubblers and 2. alumina trap absorbers.

Alumina is just Al2O3. So, the very first idea to get HF out of the air was to dump a load of fine alumina dust into the air from high altitudes. Then one has to consider the air is loaded with HCl, H2SO4, and HF from coal burning, so as the aluma falls it will react with these acids in the air. And all the reaction products of aluminum with those three acids are hygroscopic. The chemicals formed were: AlCl2*6HOH, Al2(SO4)3*18HOH, and AlF3*3.5HOH. That was the birth of aluminum chemtrails idea. It just involved the very same technique used in the Manhattan Project to control the HF releases, and added only the airborne dispersion.

Once the hygroscopic idea came into view, it was a prime idea for making persistent clouds for reflection of IR heat, as well as complexing with the fluorine to pull it down via water affinity and by MW with aluminum. These were the Generation 1 methods of chemtrails and were about the same thing as a rocket with aluminum and chloride propellants and the similar big white water vapor trail from rockets.

HAARP was the idea to deal with the upper atmospheres sequestration of the light hydrocarbons. Its model was the ORNL Fusion Energy Divisions plasma heating method using the largest auto-tune synthesized HF / VHF transmitter made at the time. It was big as a freight truck trailer.

The Alaska version of the same plasma heating method aimed at the plasma in the sky was just a scaled up version of what ORNL experimented with to make D-T Fusion. These experiments happened at the very same DOE plant that makes the lithium-deuteride hydrogen bomb fusion weapons parts for the DOD. The Fusion Experiments building was a huge WWII vintage building that once made bomb uranium using calutron technology.

The inventions of chemtrials and HAARP for GW remediation were just common sense extensions of existing methods in use in Oak Ridge, just scaled up in size a bit.

Rather simple stuff, and really simple chemical methods employed to modify atmospheric problems. These ideas would lead to the Generation 2 methods of chemtrails that would take more than a decade to get into place, with the same goal of washing acids, particularly HF, from the air to reduce GW.