Ancient Laser Cutting Technology Used All Over The Planet

Did they have 'mechanical' equipment to mix it transport it and pour it? Of course not and that is where your point turns to dust.

This cutting technology can be done with application of ultrasonics, waterjet cutting and wire EDM ablation techniques.

Ultrasonics would be the easiest to apply for drilling and routing out material with an ablative machining tool dealing with multiple axis planes.

Waterjet is using high velocity water with embedded abrasives that cut material without thermal damage. Waterjet accuracy is +/- .05mm

Wire EDM uses electric ionization using a electrolytic liquid bath, wire and a conductive working material as an electric circuit. Wire EDM is accurate to +/- .005mm.

The combination of poured and water jet cut makes the most sense. I wonder if some of those walls with the perfectly interlocking asymmetric shapes were poured in one big block and then the shapes were cut in later?

seems like they went to great lengths to keep the methods secret

like people in charge have always wanted everyone in the dark about everything

and I’ll bet if anyone developed ass pox or anything similar they got dragged behind a horse

Humans have the capacity to be the smartest live forms in the galaxy and once, many many years ago we were just that, however we also have a tendency toward domination and violence so other races fought a great war against our empire and we lost.

What was remaining of the human race was exiled to earth, a planet with an extinction cycle making it almost impossible for use to advanced to far within the cycles timescale.

External races continually monitor us keeping our progress in check, they also take the technology we invent during each cycle and use it.

They really did not like it when we rediscovered fusion again but they also knew this cycle is coming to an end and there's nothing we can do about it.

Interesting take

Everyone thinks it’s amazing technology but I have a friend who uses a magnifying lens and sunlight to melt stone. He creates lava using sunlight and he’s just goofing around.

I have seen enough evidence that some advanced cutting tech was used in Egypt but moulding and pouring too, same as South America. I doubt lasers but in Egypt case they had lots of water and almost certainly used it for moving and shaping those rocks.

Sure they did troll. They had everything we have now. And they had more. Do a little reading and get off the mainstream tittie of lies.

Plato said earth has shaken many civilizations from her back. Civilizations much greater than our own.

Just look around you. The evidence is everywhere.

End of the XIXth century, France moved to 230 tons obelisks from Egypt to Paris. They built machines to bring them down and erect them again based on Egyptian machines depicted on some frescoes.

Most people thought it would be impossible but it only took 200 men to move and erect these 230 tons stones.

Anyone claiming mankind is not able to build, move and erect these stones is simply projecting his own stupidity and lack of imagination

Concrete ? I dont think you can pour GRANITE.

Egyptians mostly had Copper chisels and tools. The only Iron they had was from Metorites and they fashioned that into trinkets.

Try cutting 50 ton granite block with a copper chisel.

Limestone was used on the outside of the Pyramids in order to give a smooth appearance; it was worn away to reveal the underlying granite.

Laser. Lol op you are too funny. In reality the technology is beyond our comprehension.

Concrete was used in Rome, but Egyptian monuments are not concrete. They have no signs of casings, and often they come from a quarry just next to it. Also crushing stone to make concrete would require more energy than just cutting and moving blocks.



If Egyptians were to cut, carve and move granite, of course they would be able to do the same with limestone.

Again, lack of imagination and projection of your own inability to do the same as them.

It takes a bit more time than limestone but still possible.

Plenty of videos from stone cutters showing it's perfectly possible

Ive seen the evidence and it is not poured concrete. The blocks were shaped and 'soft' when placed together. I dont believe that ancient humans did this.

What if the civilizations that created these structures PRE-DATED the hardness of the materials used ?

Think about it.......


[link to youtu.be (secure)]


[link to youtu.be (secure)]


Suddenly the methods & logistics used become a whole lot simpler.

This.

I think you are right. The whole history we are told in school is a complete lie. They are trying to portrait ancient civilization as dumb and archaic when in reality they were using technology superior to our own.

It's not just tools, it's transportation too. Stone blocks excavated hundreds of miles away from their construction sites. They had to had a way to move these blocks from these remote locations with ease.

So many things we don't know.

If you look at the base of the pyramids there is actally a different type of construction method for the base. Its as if the current pyramids were rebuilt over a much older destroyed structure using only the original foundation.

Actually we do know, since it was all depicted in temples.

They used wooden trunks and boats.

Again, 200 men moved 2 230tons obelisks from Egypt to Paris end of the 19th century, then erected them.


Now if 200 men can do that, imagine what 2000 can do over much shorter distances.

Your lack of faith in mankind ingenuity us depressing

I love how mankind was able to build dozens of spectacular cathedrals in Europe during the middle age, a time when a lot of knowledge was lost, and then Americans see older, less complex buildings and think : "nobody could have possibly made that without modern or exotic technology"

The stupidity and naivety of Americans is always so entertaining.

This is what I come to GLP for

Thats plausible but why have the strangeness in the block placement. Like at Saksaywaman the stones seem so randomly places, the dont seem to follow any pattern. I get that this helps with earthquakes but you will often see two great stone and right in the middle will be this tiny stone seemingly randomly placed. Wtf is that for most ask themselves.

Its like they had randomly sized stones and they placed then in a hurry and didnt care what size stone they used next.

Built by the giants.

Why are you lying? Granite was only used for the chambers and hallways.


Both the exterior and interior of the pyramid is limestone

it takes heat and weight to create the materials. you cant do the one before the other.

Oops wrong video heres the one I tried to post